300mm - 5.6m Any Size  LAUXES Matt Black Wide Aluminium Slimline Standard Floor Grate Drain 5600*100*26


Features:  


  • Custom length floor tile insert 
  • Any Size, Any Waste Position
  • Available in lengths up to 5.6m (ability to extend further using Lauxes joiners)
  • Easy to cut to desired length
  • Easy to clean (easy roll out system)
  • No welding required
  • No major plumbing involved as waste canbe positioned anywhere along the bottom tray.
  • Australian Standards and watermarked with a lifetime rustproof warranty
  • WaterMark Certification 022370 in accordance with WMTS - 040
  • Installation MUST be by a licensed plumber and in accordance with AS/NZA 3500.2
  • Please note the waste hole is not drilled in the bottom tray - please advise if this is required (additional fees apply)
  • A bi-metal hole saw can be used to cut the drainage hole - please ask your plumber/builder 
  • Includes: 1 x tile insert, 2 x end caps and 1 x 40mm, 50mm, 72mm (most popular) or 80mm waste

Cutting & Assembly Instructions:


  • For easy cutting of floor grate, we recommend the use of a compound mitre saw fitted with a multi-material cutting blade 80 tooth or more.
  • A compact drill with a bimetal hole would be adequate to drill the hole for the waste outlet.
  • 1.Cut the bottom tray 3mm shorter than desired length to allow end caps to be fitted
  • 2.Cut the top grate 1mm shorter than the bottom tray to allow for easy roll in of top grate and tidy fit
  • 3.Using the suitable size hole saw for your pop waste, drill out the hole at the required position to align with the waste pipe in the floor
  • 4.Insert the end caps into the bottom tray and secure with a bead of silicone on the inside of the tray
  • 5.Place silicone around the lip of the pop waste and secure to the underside of the bottom tray at the recently drilled hole


Additional information:


  • Ordering Status – In Stock
  • Delivery – Available upon request.



   

300mm - 5.6m Any Size LAUXES Matt Black Wide Aluminium Slimline Standard Floor Grate Drain 5600*100*26

  • Product Code: LA-MWSFG-LENGTH
  • $132.00

Available Options


Features:  


  • Custom length floor tile insert 
  • Any Size, Any Waste Position
  • Available in lengths up to 5.6m (ability to extend further using Lauxes joiners)
  • Easy to cut to desired length
  • Easy to clean (easy roll out system)
  • No welding required
  • No major plumbing involved as waste canbe positioned anywhere along the bottom tray.
  • Australian Standards and watermarked with a lifetime rustproof warranty
  • WaterMark Certification 022370 in accordance with WMTS - 040
  • Installation MUST be by a licensed plumber and in accordance with AS/NZA 3500.2
  • Please note the waste hole is not drilled in the bottom tray - please advise if this is required (additional fees apply)
  • A bi-metal hole saw can be used to cut the drainage hole - please ask your plumber/builder 
  • Includes: 1 x tile insert, 2 x end caps and 1 x 40mm, 50mm, 72mm (most popular) or 80mm waste

Cutting & Assembly Instructions:


  • For easy cutting of floor grate, we recommend the use of a compound mitre saw fitted with a multi-material cutting blade 80 tooth or more.
  • A compact drill with a bimetal hole would be adequate to drill the hole for the waste outlet.
  • 1.Cut the bottom tray 3mm shorter than desired length to allow end caps to be fitted
  • 2.Cut the top grate 1mm shorter than the bottom tray to allow for easy roll in of top grate and tidy fit
  • 3.Using the suitable size hole saw for your pop waste, drill out the hole at the required position to align with the waste pipe in the floor
  • 4.Insert the end caps into the bottom tray and secure with a bead of silicone on the inside of the tray
  • 5.Place silicone around the lip of the pop waste and secure to the underside of the bottom tray at the recently drilled hole


Additional information:


  • Ordering Status – In Stock
  • Delivery – Available upon request.



   

Loading...